|
| |
Accessories
High speed fresh water heat exchanger
Huge warm
water transfer capacity of 42 L/min
The fresh water heat exchanger has many advantages: It
transfers high warm water values and is absolutely reliable, it has a very low
warm water extraction from the buffer tank. The large dimension specialized
copper heat exchanger warms up only as much drinking water you need
instantaneously.
The complete unit pre-mounts, with the following capability
characteristics:-
High speed fresh water heat exchanger
Pricing
| |
Description |
|
 |
High speed
fresh water heat exchanger
Box Mounted
110 KW 42
L/min
|
|
 |
Laddomat 1¼"
Boiler return @ 72
C
Pump
Stop valves
Thermometers at all
outlets |
|
 |
Thermal Safety device ¾ "
|
|
 |
Chimney fan
Chimney Fan 160 mm
/ 200 mm please order for the boiler size
|
|
 |
Zone
regulators
Boiler circle pump
with enclosure and reflux preventer 1" |
|
 |
Exhaust thermostat
With
change-over contact 230 V for the boiler change-over wood oil/gas
|
|
 |
Laddomat Cartridge
Temperature
cartridge Laddomat (spare part) for Laddomat 1¼ 63/72/78/83/87
°C
|
 |
Boiler Safety Unit 1" (female thread) with insulation box
manometer indicator zone 1-4 bar automatic air vent safety
valve 2,5 bar
|
| |
Electrical
heating staffs |
|
|
Electrical
heating staff, 2.0 KW of depth: 430 mm, 230 V with thermostat (14-75°C) as well as safety temperature limiter on 100°C thread 1½ " |
|
Electrical
heating staff, 3.0 KW
of depth: 430 mm, 230 V
with thermostat (14-75°C)
as well as safety temperature limiter on 100°C
thread 1½ " |
|
Electrical
heating staff, 3.8 KW
of depth: 430 mm, 230/400 V
with thermostat (14-75°C)
as well as safety temperature limiter on 100°C
thread 1½ " |
|
Electrical
heating staff, 4.5 KW of depth: 470 mm, 230/400 V
with thermostat (14-75°C)
as well as safety temperature limiter on 100°C
thread 1½ " |
|
Electrical
heating staff, 6.0 KW
of depth: 630 mm, 230/400 V
with thermostat (14-75°C)
as well as safety temperature limiter on 100°C
thread 1½ " |
|
Electrical
heating staff, 9.0 KW
of depth: 780 mm, 230/400 V
with thermostat (14-75°C)
as well as safety temperature limiter on 100°C
thread 1½ " |
 |
Heat Exchanger |
|
Finned tube heat exchanger 1,3 m²
installation length 560 mm diameter 110 mm screwed connection ¾" - seamless rolled fin-tube GEWA-D with hard soldered
screw connection; suitable for solar fluid - incl. a kit of flange joints
- max. temperature: 90°C; max. pressure: 14 bar |
|
Finned tube heat exchanger 1,6 m²
installation length 670 mm diameter 110 mm screwed connection ¾"
See above for technical description |
|
Finned tube heat exchanger 2,3 m²
installation length 850 mm diameter 110 mm screwed connection ¾"
See above for technical description |
Please note a there is a 2% charge on credit card payments.
We accept debit cards, bank transfers and cheques free of
charge however cheques must clear before goods are shipped.
| |
Storage tank and heating accessories |
 |
Contact Thermostat
incl. mounting material
|
 |
Immersion Thermostat with ½˝ immersion sleeve
automatic temperature regulation for wood log boilers and boilers
|
 |
Dial Thermometer
casing: 80 mm Ø
fitting length: 100 mm
screw-in thread: 1/2“
|
 |
Capillary Thermometer
casing size 48 x 48 mm
|
 |
Capillary Thermometer
casing size 11 x 62 mm
|
 |
Immersion Sleeve (100 mm length)
- inner diameter: 6 mm; ½˝ male thread
Immersion Sleeve (130 mm length)
- inner diameter: 6 mm; ½˝ male thread
Immersion Sleeve (310 mm length)
- inner diameter: 6 mm; ½˝ male thread |
 |
Magnesia Anode
connection 1 1/4“
(please note type of the tank) |
 |
Magnesia Anode
with threaded bolt M 8 x 30
(please note type of the tank) |
 |
Thermostatic DHW Mixing Valve
- adjustment range 30–65°C
- with screwed fitting ¾˝ male thread
- DVGW-authorisation
|
 |
3-way-Changeover Valve; connection DN25
- 230 V, with spring return
- flow temperature limits: 5°C - 110°C
- max. operating pressure: 10 bar
- suitable for water/glycol composites
- screwed connection: ¾” male thread |
| |
System separation/heating circuit modules |
 |
Plate heat exchanger with safety unit
Ready to install, compact unit with pre-assembled heat
exchanger for the hydraulic separation between the media of the primary
and secondary heating circuit. max. allowable operating
pressure 10 bar
max. allowable operating temperature 110°C
scope of delivery: 1 plate heat exchanger, 4 screwed
fittings G3/4“ - G1 1/2“, 25°, 3 elbows G3/4“, 1 fitting with air bleed
valve, 1 corrugated hose, 1 cap valve, 1 connecting pipe safety unit,
seals, 1 insulation jacket |
 |
Heating circuit module 3-way-mixing valve,mixing motor
and 3-phase heating circuit pump
insulation box with white blinds; packed in cardboard
box (without wall bracket)
|
 |
Heating circuit module without mixing valve, with
3-phase heating circuit pump
insulation box with white blinds; packed in cardboard
box (without wall bracket)
|
| |
Accessories |
 |
Wall bracket for heating circuit
fits for our heating circuit modules, incl. mounting material
|
 |
Heating circuit distributors for 2 groups
with insulation; packed in cardboard box (without wall bracket)
|
 |
Heating circuit distributor for 3 groups
with insulation; packed in cardboard box (without wall bracket)
|
 |
Heating circuit distributor wall bracket
fits for our heating circuit distributors
|
 |
Ball valve kit with screwed connection
for the connection of heating circuit distributors or
heating circuit modules, consists of 2 ball valves, 2 cap nuts and 2
seals
|
Send mail to
energystore7@aol.com
with questions or comments about this web site.
|
